hydraulic-saivs

Hydraulic cylinders get their power from pressurized hydraulic fluid

2009-05-05T20:15:00.000-07:00

Hydraulic cylinders get their power from pressurized hydraulic fluid, which is typically oil. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on each end by the cylinder bottom (also called the cap end) and by the cylinder head where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder in two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end). The hydraulic pressure acts on the piston to do linear work and motion. Flanges, trunnions, and/or clevisses are mounted to the cylinder body. The piston rod also has mounting attachments to connect the cylinder to the object or machine component that it is pushing.
A hydraulic cylinder is the actuator or "motor" side of this system. The "generator" side of the hydraulic system is the hydraulic pump which brings in a fixed or regulated flow of oil to the bottom side of the hydraulic cylinder, to move the piston rod upwards. The piston pushes the oil in the other chamber back to the reservoir. If we assume that the oil pressure in the piston rod chamber is approximately zero, the force on the piston rod equals the pressure in the cylinder times the piston area (F=PA) .

The piston moves instead downwards if oil is pumped into the piston rod side chamber and the oil from the piston area flows back to the reservoir without pressure. The pressure in the piston rod area chamber is (Pull Force) / (piston area - piston rod area)

A reservoir, a hydraulic cylinder, and a pump make up the three main parts of a Hydraulic pump. Pumping hydraulic fluid from the reservoir into the bottom cavity of the cylinder causes the piston rod to be pushed up, which pushes the fluid in the other cavity back into the reservoir. This procedure pressurizes the chamber and extends the piston to its full length. Pumping hydraulic fluid into the upper chamber of the cylinder pushes the piston rod down, pushing the oil in the other chamber back into the reservoir, completing the cycle.

Popular Hydraulic Pump Types

2009-03-27T00:37:00.000-07:00

Hydraulic pumps convert mechanical energy and motion into hydraulic fluid power. The basic idea is very simple: force that is applied at one position is transmitted to another position using an incompressible fluid, like oil, which cannot be compressed but rather is displaced when pressure is applied.

A reservoir, a hydraulic cylinder, and a pump make up the three main parts of a Hydraulic pump. Pumping hydraulic fluid from the reservoir into the bottom cavity of the cylinder causes the piston rod to be pushed up, which pushes the fluid in the other cavity back into the reservoir. This procedure pressurizes the chamber and extends the piston to its full length. Pumping hydraulic fluid into the upper chamber of the cylinder pushes the piston rod down, pushing the oil in the other chamber back into the reservoir, completing the cycle.

Popular Hydraulic Pump Types

Vane pumps, piston pumps, and gear pumps are the foremost types of hydraulic Pump

Gear pumps - uses gears to pump fluid by displacement. Hydraulic gear pumps are one of the most common types of pumps. There are several advantages and disadvantages to gear pumps. The advantages are: high speed, high pressure, and quiet operation. The disadvantages are: the use of four bushings in the liquid area and fixed end clearances.

Rotary vane pumps - are positive-displacement. They include a ring mounted inside a cylindrical case. There are a number of radial slots in which sliding vanes are located. Mounted to the case is the ring and the vanes are designed to press against the inside wall of the case. Hydraulic pressure or spring force or centrifugal force as the ring is rotated will cause the vane to be forced against the wall.

Axial piston pumps - are positive displacement. There are several pistons in a circular arrangement in a cylinder block.

Radial piston pumps - a circular arrangement of hydraulic pistons, and valves which allow pressures greater than 650 Bar (~10,000 psi) to be built.

Screw pumps - positive displacement pumps. Have one or more screws that rotate to transfer high or low viscosity fluids along an axis.

Weighing Scale, motorcycles, aluminum case

Hydraulic Tools

2009-02-15T22:48:00.000-08:00

hydraulic tool holding range is suitable for high speed and high precision machining operations
Suitable for high speed and high precision machining operations, such as milling, drilling, reaming, boring and engraving, the DEllner Hydraulic Tools
holding range is rated to G2.5 at 15,000 rev/min as standard, with tighter balanced performance available on request.

The balance, and the TIR (total indicated run-out) of less than 3 micron achieved, makes the range ideal for use in demanding sectors such as aerospace, motorsport, die and mould and toolmaking.

Leader told manufacturingtalk that the Dellner toolholders suit any industry where tool rigidity during high speed cutting is critical to the accuracy of the finished part.

Smooth cylindrical shanks up to 32mm diameter and Weldon shanks up to 20mm diameter can be clamped directly in the holder. Hydraulic Cylinder

Standard clamping tool shank diameters are 6, 8, 10, 12, 16, 20 and 32mm, with metric and imperial intermediate sleeves available to hold tool shanks between 3mm and 25mm diameter.

l Self-contained design - the self-contained design means that no additional equipment is needed, the tool simply slides into the holder against a fixed stop and is hydraulically clamped by means of a hexagonal key.
· Hydraulic Tools
· Hydraulic Pump
· Hydraulic Wrench
· Hydraulic Cylinder
· Hydraulic Puller
· Hydraulic Nut Splitter
· Hydraulic Pusher
· Hydraulic Jack
· Hydraulic Bolt Tensioner
· Hydraulic Shear
· Socket for Hydraulic Wrench
· Hydraulic accessories

Know More About Hydraulic Jack

2008-12-08T16:52:00.000-08:00

Hydraulic Cylinder are ordinarily used in construction projects. These are specifically used in demolition and setting the structure's foundation. Jack hammers can also be used in excavation and mining.

Jack hammers are known also as pneumatic drills. These are used for breaking down

- rocks
- concrete pavement and
- roads

Hydraulic Jack has handles on one end and a drill like chisel on the other end. This instrument is important for so many reasons. They are more efficient than the conventional hammer and chisel. It takes less time to finish work using jack hammers. This instrument is more effective if you use it on a horizontal plane.

Different types of jack hammers have been made to maximize the existing capabilities of pneumatic drills. The three types are:

1. Pneumatic drill - from which the term has come from, is powered by air. It is connected to an air compressor with a hose. The air compressor is run by gasoline. This tool is portable as compared to other types.

2. Hydraulic jack hammer - it is in contrast to a pneumatic drill. This instrument is powered by liquid. It is used for demolition projects and wide scale mining.

3. Electric jack hammer - this type of jack hammer is convenient for small construction projects. It does not require force. Unlike the hydraulic-powered jack hammers, this one is mainly used in household.

You must be experienced to be able to operate jack hammers. There are a great variety of electric jack hammers available. Select the more efficient models. Check also on the watts, amp and other specification when buying electric jack hammers.

For example: The modern automatic jack hammers require less effort than the older models. Brass ball valve ，It is a better option to rent jack hammers than buying a new one. It is due to the fact that jack hammers are only useful when you are doing a construction of a house. The usage of Jack hammers is only minimal. You do not need to buy a jack hammer unless you are not planning to open your own construction company.

You don't need to limit yourself to your nearest construction materials provider. You can even check for jack hammer rentals. There are lots of deals that you will see. Some jack hammer rentals even gives specific deals.

Jack hammers pose a lot of risk with its operation. If you are a jack hammer operator by profession, you must manage maximum security. You must strictly adhere to the basics of jack hammer precautions.

To learn how to use jack hammer correctly, one must undergo safety training. If you know the correct way of operating it, you will find it easier to understand and follow safety protocols.
The article is from www.hydraulic-saivs.com

Welcome to Ningbo Sunter Machinery Co., Ltd

2008-11-28T00:24:00.000-08:00

Ninbgbo Sunter Machinery Co., Ltd established in 1990, specialized in the field of design, manufacture and technical support in hydraulic tools and hydraulic system, especially providing hydraulic cylinder, super high pressure electric pump station, hydraulic torque wrench, special pump for hydraulic wrench, hydraulic pullerand other non-standard hydraulic tools. And can supply project solutions according to customer requirement.

The products widely used in the industrial field of steel, shipbuilding, electric power, chemical, metallurgic, construction etc. , those kinds of parts sells well in market, and we have customers from USA, Canada, British, Australia, France etc.Sunter located in the famous port city Ningbo which lies on east coastle of China. It has a production area of 20000 square metres, 300 employees. And it has inspection tools and equipments for production, inspection, measure and testing, such as heattreat furnace, metallurgic microscope, magnetic detect, Spectrum, impact tester, universal tester, hard tester, and CMM.

Applied with German advanced technology introduction, some parts use the hydraulic elements and seals from German and using the advance importing CNC machine equipments, matched with high-quality staff and strict quality management, we can provide good-quality products. Ningbo Sunter is a recognized manufacturer who specializes in kinds of hydraulic tools,including hydraulic cylinder,Hydraulic Jack,Hydraulic Pump,Hydraulic Wrench,Hydraulic Puller,Hydraulic Pusher and Hydraulic Accessories

The other detailed products include Hydraulic Nut Splitter., Hydraulic Bolt Tensioner,, Hydraulic Shear, Socket for Hydraulic Wrench. Depending on the strict quality control, and the actualization of ISO 9001 quality manage system and qualified engineer and technicians, Saivs want to give you advanced technology, quality products and in-time service, just want to be the solution provider and partner worth reliable.